Koop EHB® double-sided acrylic adhesive tapes rank at the very top among various famous brands of such adhesive tapes currently available on the global market. They are used for highly exposed applications where stable quality is necessitated over a long-life cycle, as well as their ability to withstand high mechanical loads and demonstrate resistance to extreme weather conditions.
EHB acrylic foam adhesive tapes are a class apart compared to standard double-sided adhesive tapes. The highly elastic properties of acrylic foam ensure an optimal response to the action of shear, tensile and compressive forces of the adhesive joint. They withstand high loads in the face of weather influences and temperature cycles. They also retain their long-term initial characteristics so material fatigue does not occur over time.
Reliability and durability over a longer period of time, fatigue is not an issue.
Extreme UV resistance and resistance to extreme weather conditions.
Perfect water tightness and air tightness, even under vacuum load.
Its unique properties ensure great toughness, strength and elasticity at the same time.
They effectively withstand loads throughout temperature changes, stress loads from vibrations and shocks and stresses from glued materials with different elongations.
Reliable delivery periods competitive prices technical support
Colour: black
Thicknesses: 0.5, 1.0, 1.2, 1.5, 2.0 mm
Colour: transparent
Thicknesses: 0.25, 0.5, 1.0, 1.2, 1.5, 2.0 and 3.0 mm
Colour: grey / black
Thicknesses: 0.25, 0.5, 1.0, 1.2, 1.5, 2.0 and 3.0 mm
Colour: white
Thicknesses: 0.5, 1.0, 1.2, 1.5, 2.0 and 3.0 mm
EHB ADHESIVE TAPES FOR SPECIFIC PURPOSES
EHB automotive tapes: for the latest automotive paints
EHB LSE tapes: for special industrial paints, ABS, PMMA, EPDM
EHB HT tapes: temperature resistant up to 220 °C
EHB LT tapes: for low temperature adhesive bonding
EHB passivated edges tapes: with non-stick surface on the edges
EHB heat activated tapes: intended for tape adhering to EPDM by a thermal process. When the tape and EPDM rubber are heated to 120-130 °C at the same time, both pressurised surfaces adhere very tightly to each other. This is a standardised process for making self-adhesive EPDM profiles for cars, buses, boats and trains.
EHB ADHESIVE TAPES - BASIC INFORMATION
Very high foam density, from 750 to 1000 kg/m3
High elasticity
Tape thickness from 0.25 mm to 3 mm
Foam thickness tolerance: +/- 50 microns
Available in transparent, white, grey and black
Optional cutting width without limiting quantities fast delivery periods
chem
Koop trgovina d.o.o.
Cesta bratov Cerjakov 43, 8250 Brežice, SI
Matična št.: 5812089000, ID za DDV: SI76767787
ehbtapes@koop.si 00386 7 477 88 20
